Audi 80/Avant (B4)

since 1991-1995 release

Repair and operation of the car



Audi 80/Avant
+ Technical specification
+ Engines
+ System of production of the fulfilled gases
+ Cooling system
+ Fuel tank and fuel pump
+ Air filter and airintaking channels
+ System of injection
+ Coupling
+ Transmission and transmission
+ Suspension bracket and steering
+ Brake system
+ Anti-blocking system of brakes
+ Wheels and tires
+ Body electrical system
+ System of ignition
+ Lighting
+ Signaling devices
+ Devices and auxiliary devices
+ Heating and ventilation
+ Body elements
+ Search of malfunctions
- Specifications
   Engine
   Cooling system
   Fuel supply system
   Fuel supply systems (continuation)
   Transmission
   Chassis
   Brake system
   Electrical system
   Filling volumes (in liters)
   Dimensions
   Plan of servicing





Plan of servicing

– in a <specialized> workshop
– at gas station <in a usual workshop>
– houses

Continuous checks

Control of level of oil
Control of level of cooling liquid
Control of level of brake fluid
Control of level of working liquid of the amplifier of steering
Control of the ATF level in AKP
Filling of a tank of windscreen washer
Control of pressure of air in tires
Lighting control
Control of indexes of turn and alarm light system
Control of a stoplight
Control of a sound signal
Control of windscreen washer and screen wiper
Control of the brake system

Each 15 000 km

(But the latest in 12 months)

1. Replacement of engine oil and oil filter
2. Measurement of thickness of frictional slips
brake shoes

Each 12 months

3. Reading of memory of the store of malfunctions
4. Visual check of the engine
5. Control of level of electrolyte in the rechargeable battery
6. Control of the moment of ignition
7. Control of the mode of idling
and test for toxicity of exhaust gases
8. Control of catalytic converter and lambda probe
9. Control of protection against freezing
10. Control of the cooling system on tightness
11. Cleaning of a replaceable element of the air filter
12. Control of a condition of a maple and poliklinovy belt
13. Control of a tension of a maple and poliklinovy belt
14. Control of level of oil in the transmission
15. Control of level of oil in the drive of the back bridge
16. Control of the brake system on tightness and damages
17. Control of a condition of brake disks
18. Measurement of thickness of frictional overlays of brake shoes of the drum brake mechanism
19. Control of a condition of a cuff of the steering mechanism
20. Control of a condition of dustproof caps and side play of tips of popererechny steering drafts
21. Control of a condition of dustproof caps of axial hinges
22. Control of a condition of cuffs of the leading half shafts
23. Control of an inhaling of bolts of fastening of wheels
24. Control of a condition of tires
25. Control of anticorrosive protection of the bottom of a body
26. Cleaning of openings for a water drain
27. Control of fastenings and condition of system of production of exhaust gases
28. Check of control indicators and lamps
29. Control of the course of a pedal of a brake
30. Control of the amplifier of brake force
31. Control of a free wheeling of the lever of system of the parking brake
32. Control of a side play of steering
33. Control of adjustment of headlights
34. Lubricant of hummock drives, hinges and locks

In addition each two years

35. Replacement of brake fluid

In addition each 30 000 km

36. Replacement of spark plugs
37. Check of a side play of the wheel bearing
38. Replacement of the dustproof filter

In addition each 60 000 km

39. Replacement of a maple belt of the generator (the poliklinovy belt does not need to be changed)
40. Control of level of transmissonny oil in the main transfer of AKP
41. Replacement of a replaceable element of the air filter
42. ATF replacement

Details to this plan of servicing you watch Regular servicing in the section








http://b3-b4.ru/