Audi 80/Avant (B4)

since 1991-1995 release

Repair and operation of the car


Audi 80/Avant
- Technical specification
   Engines
   Transmissions
   Body
   Chassis
   15-inch wheels
   Brake system
   Seats
   Passive safety
   Four-wheel drive
   Distributive Torsen-differential
   Dynamics of the movement at a dry paving
   Instructions on operation for all-wheel drive cars
   Blocking of differential of the back bridge
   Motor compartment
   Regular servicing
   Organization of a workplace
   Lubricant works
   Oil consumption
   Right choice of engine oil
   Replacement of engine oil and oil filter
   Check of level of working liquid of the power steering
   Check of level of oil of the mechanical transmission
   Check of level of oil in the drive of the back bridge
   Control of the ATF level in the automatic transmission
   Check of level of oil in the main transfer of the automatic transmission
   ATF replacement
   Lubricant of hummock drives, hinges and locks
+ Engines
+ System of production of the fulfilled gases
+ Cooling system
+ Fuel tank and fuel pump
+ Air filter and airintaking channels
+ System of injection
+ Coupling
+ Transmission and transmission
+ Suspension bracket and steering
+ Brake system
+ Anti-blocking system of brakes
+ Wheels and tires
+ Body electrical system
+ System of ignition
+ Lighting
+ Signaling devices
+ Devices and auxiliary devices
+ Heating and ventilation
+ Body elements
+ Search of malfunctions
+ Specifications


ивановский трикотаж интернет магазин



Check of level of oil in the main transfer of the automatic transmission

The oil grade, other than what is applied in the mechanical transmission is applied to the main transfer of the automatic transmission. It has to have viscosity of SAE 90 and one of the following specifications:

API GL 5 - MIL-L-2105B

Replacement of oil is not provided, however it is necessary to control oil level,

  • if the case of the main transfer is outside soiled by oil or
  • the ATF level in the automatic transmission rose or fell without signs of external leakage. In this case, perhaps, "exchange" of lubricant means between planetary transfer and the main transfer as it is described in the previous section took place. Control of level of oil happens according to the scheme described in the previous section.