Audi 80/Avant (B4)

since 1991-1995 release

Repair and operation of the car



Audi 80/Avant
+ Technical specification
+ Engines
+ System of production of the fulfilled gases
+ Cooling system
+ Fuel tank and fuel pump
+ Air filter and airintaking channels
+ System of injection
+ Coupling
+ Transmission and transmission
+ Suspension bracket and steering
+ Brake system
+ Anti-blocking system of brakes
+ Wheels and tires
+ Body electrical system
+ System of ignition
+ Lighting
+ Signaling devices
- Devices and auxiliary devices
   Check of indicators and signaling devices
   Elements of a combination of devices
   Speedometer
   Tachometer
   Hours
   Indicator of amount of fuel
   Indicator of temperature of cooling liquid
   Voltage stabilizer
   Additional devices
   The top indicators in a combination of devices
   Indicator of cooling liquid
   Indicator of the brake system
   Oil pressure indicator
   Indicators of indexes of turns
   Lower indicators
   Indicator of a charge of the rechargeable battery
   Indicator of indexes of turn of the trailer
   Safety cushion indicator
   Indicator of anti-blocking system
   Indicator of driving beam
   Indicator of the parking brake
   System of self-examination
   Switches
   Ignition lock
   Check of switches
   Buzzer of shutdown of lighting and radio
   Lighter
   Heating of back glass
   Check of screen wipers and windscreen washers
   Screen wiper engine
   List of malfunctions
   Screen wiper of back glass
   List of malfunctions
   Replenishment of a washer reservoir of glasses
   System of washing of headlights
   Audio system
   Antenna of back glass
   Electric regulation of external rear-view mirrors
   System of locks with the central management
   Power windows
+ Heating and ventilation
+ Body elements
+ Search of malfunctions
+ Specifications





Indicator of amount of fuel

Scheme of an arrangement of the sensor of temperature of the engine

1 – contact of a signaling device "overheat of cooling liquid";
2 – "weight" (case);

3 – indicator of temperature of cooling liquid.


For regulation of the indicator of amount of gasoline to remove small nippers a black stopper (a black arrow) near the button of dumping of number of the passable kilometers. Now it is possible to adjust the indicator rotation of the adjusting screw (a white arrow) by means of a face six-sided wrench.

Level of gasoline is displayed on the dashboard. Thus, the indicator of amount of fuel is nothing else as the voltmeter to which full tension arrives at the included ignition. In order that tension was constant, in an electric chain the preliminary voltage stabilizer about which we will speak still is connected.

The movement of an arrow of the indicator of amount of fuel varies by means of contact with "weight". It is provided by the sensor of amount of fuel which resistance changes in the big or smaller party depending on filling of a tank. Removal of the sensor of the indicator of amount of fuel is described in the head the Fuel tank and the fuel pump.

Malfunctions

  • Too high or too low level: the voltage stabilizer is faulty (as to remove it, it is described at the beginning of the head, in the section "Dismantling", or the indicator of amount of fuel is incorrectly adjusted (see the following section).
  • Any indicators: the voltage stabilizer, or the sensor in a gasoline tank, or the indicator is faulty.

Regulation of the indicator of amount of fuel

 PERFORMANCE ORDER

  1. To devastate the fuel tank to a last straw.
  2. To pour exactly 4 l of fuel in a tank.
  3. To include ignition and to wait 2 min.
  4. The arrow of the indicator has to stand at the first big column of the red field of a reserve now.
  5. If it not so, it is possible to adjust the indicator a small adjusting bolt at the left below on the device.
  6. For this purpose remove by means of little ticks a black stopper near the button of dumping of number of the passable kilometers and turn the adjusting screw a key for an internal hexagon.

Check of the sensor of the indicator of amount of fuel

 PERFORMANCE ORDER

  1. To cast away a covering of a luggage compartment, to turn off a black cover, to separate the multicontact plug which is under it.
  2. To connect an auxiliary wire in the shtekerny socket of a violet-black wire and to close on "weight".
  3. To include ignition for a short time: if the arrow of the indicator completely deviates, so conducting and the indicator as it should be. If there is no movement of an arrow, so the sensor in the fuel tank is faulty.
  4. If the arrow remains in situation "empty tank", so the cause of defect should be looked for in conducting, in the voltage stabilizer or the device. The sensor in this case most likely as it should be.







http://b3-b4.ru/