Audi 80/Avant (B4)

since 1991-1995 release

Repair and operation of the car



Audi 80/Avant
+ Technical specification
+ Engines
+ System of production of the fulfilled gases
+ Cooling system
+ Fuel tank and fuel pump
+ Air filter and airintaking channels
+ System of injection
+ Coupling
+ Transmission and transmission
+ Suspension bracket and steering
+ Brake system
+ Anti-blocking system of brakes
+ Wheels and tires
+ Body electrical system
+ System of ignition
+ Lighting
+ Signaling devices
- Devices and auxiliary devices
   Check of indicators and signaling devices
   Elements of a combination of devices
   Speedometer
   Tachometer
   Hours
   Indicator of amount of fuel
   Indicator of temperature of cooling liquid
   Voltage stabilizer
   Additional devices
   The top indicators in a combination of devices
   Indicator of cooling liquid
   Indicator of the brake system
   Oil pressure indicator
   Indicators of indexes of turns
   Lower indicators
   Indicator of a charge of the rechargeable battery
   Indicator of indexes of turn of the trailer
   Safety cushion indicator
   Indicator of anti-blocking system
   Indicator of driving beam
   Indicator of the parking brake
   System of self-examination
   Switches
   Ignition lock
   Check of switches
   Buzzer of shutdown of lighting and radio
   Lighter
   Heating of back glass
   Check of screen wipers and windscreen washers
   Screen wiper engine
   List of malfunctions
   Screen wiper of back glass
   List of malfunctions
   Replenishment of a washer reservoir of glasses
   System of washing of headlights
   Audio system
   Antenna of back glass
   Electric regulation of external rear-view mirrors
   System of locks with the central management
   Power windows
+ Heating and ventilation
+ Body elements
+ Search of malfunctions
+ Specifications





Replenishment of a washer reservoir of glasses

Continuous check

Suspension from exhaust gases, evaporations of oil and silicone from conditioning agents behind a varnish are constantly postponed on glasses. In warm season therefore it is recommended to add detergent to water; in the winter nonfreezing liquid is necessary.

After removal of a plastic cover of a waterproof casing there are available three fixing screws (1, 2 and 3) of levers of a screen wiper.

On an illustration on the right the engine of a screen wiper (1) is removed from the lever. On the drive (2) carving openings of fixing screws (arrow) are visible. As there has to be a crank of the drive (3) at installation, shows the drawing: shift from a parallel on
a = 6 ° to an average axis of the engine.


 PERFORMANCE ORDER

  1. The bulk branch pipe for water is at the left in a motor compartment near a broad tank of cooling liquid. The tank includes about 4 l on the models which are not equipped with system of washing of headlights if the car is equipped with similar system, the tank contains about 6,5 l.
  2. At first it is necessary to pour in detergent, only then water in order that these liquids well mixed up in a tank.
  3. If the car is not equipped with system of heating of vpryskny nozzles, they can freeze in hard frosts.
  4. For prevention of it the increased concentration of nonfreezing liquid is recommended. Impurity of the denatured alcohol can bring in a combination in the anti-freezing means to formation of flakes therefore nozzles can be hammered.
  5. Embedding of the ordinary petrol filter in the pipeline of system of washing of glasses prevents obstruction of the washing nozzles.
  6. System of washing of back glass at Audi 80/Avant (station wagon): the tank for water with a rotary bulk branch pipe is under a cover on the right in a luggage compartment.

Regulation of the spraying stream

 PERFORMANCE ORDER

  1. To insert a needle into an opening of the spraying nozzle.
  2. The opening is in a ball which can be turned by means of a needle.
  3. To turn a nozzle until the water stream, as shown in the drawing, does not begin to get on glass.

The nozzles which are warmed up electrically

Directly before nozzles there is a metal case with the heating resistor. With inclusion of ignition (plug X) on this resistance current arrives. Nozzles quickly thaw thanks to the high current arriving at first (0,5 — 0,7 And). For keeping of temperature current after a phase of heating falls to exactly 200 мА. If external temperature makes minus15 °C and below, the supporting current increases to 320 мА.

Search of malfunctions

 PERFORMANCE ORDER

  1. To separate shtekerny connection to a nozzle.
  2. At the included ignition to check the voltmeter whether tension and whether as it should be contact on "weight" arrives.
  3. Otherwise to look for conducting damage.
  4. If with food everything is all right, it is necessary to replace a nozzle.

Thus it is necessary to establish nozzles of system of washing of glasses:
and = 20 cm, b = 45 cm, with = 22 cm, d = 48 cm.








http://b3-b4.ru/