Audi 80/Avant (B4)

since 1991-1995 release

Repair and operation of the car



Audi 80/Avant
+ Technical specification
+ Engines
+ System of production of the fulfilled gases
+ Cooling system
+ Fuel tank and fuel pump
+ Air filter and airintaking channels
+ System of injection
+ Coupling
+ Transmission and transmission
+ Suspension bracket and steering
+ Brake system
+ Anti-blocking system of brakes
+ Wheels and tires
+ Body electrical system
+ System of ignition
- Lighting
   Lighting check
   Spare lamps
   Replacement of lamps
   Removal of headlights
   Check of adjustment of headlights
   Fog lights
   Independent installation of fog lights
   Indexes of turns
   Back lamps
   Illumination of registration plates
   Other lighting fixtures
   Dashboard illumination
+ Signaling devices
+ Devices and auxiliary devices
+ Heating and ventilation
+ Body elements
+ Search of malfunctions
+ Specifications





Independent installation of fog lights

Models with 4-and 5-cylinder engines

Fog lights from shop of spare parts look on a streamline body of Audi 80 not really well, besides, difficult reliably to establish them on appropriate places. Therefore it is necessary to establish original fog lights, and it means that it will be necessary to replace the bumper panel on having openings for installation of fog lights. In addition you will need the relay of fog lights and the original switch for the dashboard. Perhaps, it is necessary to put narrower shelf (also original detail) near the panel of switches. Installation needs to be made in this case as follows:

 PERFORMANCE ORDER

  1. To remove forward panels of a bumper (the head Elementy of a body).
  2. Below plugs of already laid connecting wires are fixed in an opening for installation of fog lights.
  3. To connect wires, to insert fog lights.
  4. To install forward panels with openings for fog lights.
  5. In the central switchboard to replace the wire bridge on a shtekerny cell of the relay 1 with the relay of fog lights.
  6. To replace a cap in the control panel with the original switch of fog lights (the head Pribory and auxiliary devices).
  7. Perhaps, you will need narrower shelf, depending on the number of already available switches.
  8. It is necessary to lay still a wire from the switch to the shtekerny station (on the additional block of the relay under the dashboard at the left). In case of doubts concerning color of a wire – be verified according to the section Electric circuits.
  9. To include. To check functioning in addition to parking, passing or driving beam. It is ready.







http://b3-b4.ru/